Blog

Is Hydro Jetting Safe for Pipes?

The inside tunnel of a clear silver sewer pipe line.

Learn More About Hydro Jetting

In recent years you may have stumbled upon the term hydro jetting with a vague understanding on what it implies as far as pipe cleaning. Before we go into the details, hydro jetting is a great option for fast and efficient cleaning of your pipelines no matter the type of pipe you have or stubborn level of clog that’s trapped inside. There are many hydro jetting benefits that will ultimately lessen the aggrievement of damages from escalating into pipe repairs or replacements. Plumbing services have included this service option specifically for the reason that it’s a reliable source of clearing out a line and makes the whole process of pipe cleaning that much faster and easier. It’s important to conduct regular maintenance checks and inspections before a service in order to determine the right course of action for your property’s well being.

The Benefits of Hydro Jetting

  • Quick Removal of Clogs & Build-Up
  • Can Tackle Tough Root Invasions
  • Works With Most Types of Pipes
  • Water Pressure Can Adjust to Different Problems

How do you clear a clogged pipe?

There are several ways you can clear a clogged pipe depending on the severity of the clog. For most cases, plumbers employ the use of a plumbers snake or auger in order to tackle cases that are deeper down the drain like hair in a shower drain or food blockages that have sunk deep in a kitchen pipe.

Hydro Jetting vs Snaking

Both methods can clear basic clogs but only hydro jetting can advance to more complex scenarios. Snaking is a gentle method that won’t damage pipes yet for certain problems it can be a temporary fix. With hydro jetting, you are able to even scour the sides of a pipe and travel further down the pipeline to ensure that all areas or potential problems are cleared in order to avoid the rise of future problems or damages.

What does Hydro Jetting do?

Hydro jetting is employed as a reliable resort for plumbers in order to either clear out clogs or blockages quickly with no hassle or get rid of tougher cases when all other plumbing techniques would fall short on. Hydro jetting is able to clear out tough or sticky build up, clogs, and root intrusions amongst other issues.

What is hydro jetting a clogged drain?

Hydro jetting is typically connected to a water tank that can be adjusted to match different water pressures needed in compliance with different types of pipes. Water pressure can go up to 5,000 psi (pounds per square inch) or higher and can send out as much as 20 gallons of water a minute. Essentially, a specialized metal nozzle is attached to a flexible hose that will be able to bend in conjunction with the many twists, turns, and angles of a pipeline. In order to clear out a path for the hose water jets out in the front of the nozzle. Simultaneously water is also jetting out at a ‘V’ formation or angle on either side of the hose in order to scour and clear out the sides and edges of the pipe so they loosen and wash away. Since the hose makes it’s way upstream the pipeline, gravity plays a huge role to pull waste downstream.

Can hydro jetting damage pipes?

If you have older pipes than high pressures can potentially damage certain areas. However, with an expert plumber performing the task as is required than they will be able to know when to make the proper water pressure adjustments or when to use other methods of clog removal. If your pipe is on the older side than it may be best to think about pipe replacements or repairs in order to avoid future problems that come with age like corrosion and higher susceptibility to clogs and breaking.

A sewer line opening with a hydro jet hose inserted into it with the feet of a plumber nearby.

What is hydro jetting sewer lines?

Hydro jetting sewer lines will employ similar techniques and protocol with adjustments in water pressure to match clearing out the different levels of a clog or block.

What does Hydro jetting cost?

Hydro jetting ranges in price from $350-$600 with severe cases running upwards of $1,000.

Is hydro jetting worth it?

Hydro jetting can be more expensive than using a snake, yet if you’ve been having regular clogs and issues with your plumbing line than it is well worth cleaning the system than allowing problems to progress into bigger issues that will cost more down the line like pipe replacements or repairs. Oftentimes, reoccurring clogs and build-up are a sign of an aged pipe so it’s important to consult with a professional before deciding on hydro jetting to see if ultimately a new section of piping would be a better fix. Before you decide on any service, like Petaluma, CA tile floor installation, it’s important to consult a professional for initial inspections so you can go with the best course of action for your property.

If you’re interested in hydro jetting in Petaluma and Santa Rosa, CA call (707) 766-0807 with Perfect Plumbing Today!

What You Need to Know About a Kitchen Remodel

As a homeowner, remodeling your kitchen can be a daunting, overwhelming project. With multiple decisions to be made in such a short amount of time, product choices and material options are halfheartedly picked and by the end, most are just ready to be finished with the whole thing. However, if your kitchen remodel project is well-planned, it can be an entertaining and even fun project. Planning your project well before beginning can also eliminate many problems, mishaps, and unneeded materials. Consider these points before beginning your kitchen remodel project.

Kitchen Remodel Project

Keep Your Kitchen Remodel Project in Check With Proper Planning and Expert Assistance.

Must-Haves When Remodeling Kitchen Spaces

When preparing to remodel your kitchen, make sure to have a detailed plan of action. It’s easy to get lost in a sea of workers and projects so a plan can help the project stay on track. It’s also important to have all chosen swatches and samples on hand, as well as a backup choice. This way, there will never be a question of what material or product you want and you will have a second choice in case of an issue. While material variations and other issues may arise with kitchen remodeling services, affecting the cost of the project, this should never be a large variation. Keep your bids, inspections, and estimates handy throughout the project to ensure that prices don’t fluctuate from the original agreement.

Kitchen Remodeling Tips

When beginning a new project as large as a kitchen remodel, it’s good to have an idea of what will take place. Keep these tips in mind to help your project be a success.

”Budget”

Decide on a Budget and Stick to It

Remodels get expensive quickly, especially in the kitchen. From range replacement to flooring and cabinetry, costs can add up. Make sure you know your budget and stick to it.

“Durability”

When it Comes to a Kitchen Remodel, Think Future

Kitchen remodels, unlike most other rooms experience a high amount of traffic and wear. When choosing materials and products for your kitchen remodel, think about how they will age in an area with high moisture heat levels as well as near constant traffic.

“Material”

Research, Research, Research!

Kitchen design and remodeling projects can get overwhelming, fast. With so many material and product options available, it can be difficult to know exactly what to choose. Speak with a field professional about each of your options to ensure that you are able to make the best choices for your home’s needs. An expert can help you decide on materials for all of your kitchen remodeling ideas, including cabinetry, flooring, paint, and any other decisions that need to be made so you can be sure that your materials stand the test of time.

Kitchen Remodeling FAQs

  • How Much Does it Cost to Remodel a Kitchen?

The cost of your project depends on the extent of the work you want to be done. It also varies according to brand and quality of the faucet and sink, appliances, and other materials. However, you can expect to spend around $10,000 for a basic kitchen remodel including cabinetry, flooring, and paint.

  • In What Order do You Remodel a Kitchen?

There is no set order in which to remodel your kitchen. Some prefer to complete the job from the bottom up and some prefer to work from the outer walls inward. Begin with a priority list to see exactly what you feel is the most important. This will help you decide which order to improve your kitchen. For example, if you dislike your cabinet design but have relatively new flooring, you may want to focus on cabinets.

  • How Often Should You Change Your Kitchen?

A kitchen remodel project should be planned according to its purpose. There is no set timeframe in which to complete a kitchen remodel. However, most are done every 15-20 years or before selling to increase the home’s value. The right time to remodel your kitchen is when you have the budget and time available to complete the entire job at once which will keep mishaps from occurring as well as protecting from uneven wear and tear.

  • How Long Does it Take to Renovate a Kitchen?

You can plan on each step of your remodel taking at least a few days. Larger projects like custom cabinetry, flooring, and plumbing can take up to two weeks. Ensure you speak with each field professional to get a timeline of each project component.

Kitchen remodeling can be a stressful project that is often overwhelming and difficult. From workers and labor teams to material decisions, the work never seems to end. The Perfect Plumbing Today team can help ease the stress with experience in all types of kitchen plumbing and fixture replacement. Our team performs kitchen remodel plumbing throughout Petaluma and Santa Rosa, CA to ensure that your project turns out just the way you planned. Call us today at (707) 766-0807 to learn more about our services or to schedule your kitchen remodel project.

Do You Have a Slab Leak?

Have you ever heard of the term slab leak? It is more common than you think. These devastating water pipe leaks wreak havoc on a home and are costly and destructive if left unrepaired. So how common are slab leaks, and what is a slab leak? They are as common as everytime a tectonic plate in the earth moves, as that is one of the factors that can cause a slab leak. Water pipes often burst behind the concrete slab in the foundation of buildings and homes when soil shifts and causes the foundation to move, suddenly rubbing against the pipe and causing it to burst. If you think you have a slab leak in your Petaluma and Santa Rosa, CA home, call Perfect Plumbing Today at (707) 766-0807 today for repairs.

What Can Cause a Slab Leak?

burst pipe behind wall rots drywall

Slab Leaks Are Where Water Pipes Burst Behind Your Foundation

Some common causes of slab leaks are:

  • Improper construction
  • Shift in soil that creates too much pressure
  • Poor water chemistry or quality
  • Abrasion or friction
  • Time
  • Corrosion

Signs of a Slab Leak

A lot of people say that slab leaks just appear out of nowhere, and that they are blindsided with a flooded room or astronomical repair bill. You can prevent these things from happening by being on the lookout for signs of a slab leak about to occur or are occuring by looking for these seven signs:

  • Water bill increases
  • Water pooling on your floor
  • Damp carpet of warped hardwood floors
  • Mold or mildew growth on your walls or ceiling
  • Decrease in water pressure because the water is exiting through the leaky pipe
  • The hot water heater never stops running because the burst pipe is always leaking and depleting your water tank, making your water heater always have to stay on and constantly refill itself
  • Hot spots on the floor

Slab Leak Detection

man conducts infrared detection test

We Use Infrared Detectors To Find Leaks Behind Your Foundation

If you have already noticed some of the above mentioned indicators of a slab leak, but want to verify before calling a contractor to perform a profession infrared slab leak detection test, there is a way you can indirectly check to if there might be a slab leak in your home. It involves turning off your main water line to see if water is still flowing in your home. If it is, you have a hidden leak in your slab!

Step 1: Turn off all inside water appliances with no remaining water running or dripping.
Step 2: Locate your outside water meter which is marked with a plastic or metal protective covering that says “water meter”.
Step 3: Remove the cover by simply lifting open the cover, though a screwdriver may be needed to pry it open.
Step 4: Check to see if the meter indicator is moving,rotating, or if the recorded numbers at the bottom are increasing. If it is even with all the water appliances turned off, you have a leak because water is still flowing out of a hole in a pipe.

You will then have to call a plumbing company like Perfect Plumbing Today for pipe leak repair or slab leak repair, depending on whether the water has damaged your foundation. If you get a regular plumbing inspection once a year, plumber can spot damages and leaks in your pipes and repair or replace them so that the destruction cannot get big enough to warrant an expensive slab leak repair. For more information about pipe repair, plumbing inspections, or slab leak repair in Petaluma and Santa Rosa, CA, call us at (707) 766-0807.

Can a Slab Leak Cause Foundation Problems?

Slab leaks can most definitely cause foundation problems. In fact, one of the telltale signs of a slab leak is cracked or shifted foundation. Well, since the foundation is part of the home, are slab leaks covered by homeowners insurance? Many times, yes they will, but there are fine details involved in the claim.

Insurance will cover only parts of the slab leak repair. This includes water damage restoration, structural damage, the removal and replacement of the slab, but not the piping, and damage to personal belongings. These are only covered by insurance if the slab leak occurred due to “covered natural peril” such as a fire, bizarre natural disaster events like volcano eruptions, and other very rare instances.

Insurance will not pay for slab leaks repair or repiping due to age, tree root invasion, or neglect. So most of the time, you are stuck having to pay it yourself. So what are your slab leak repair options? There are a few, luckily and they range in price which is beneficial since you are having to pay out of pocket for this.

Slab Leak Repair Options

water lines under floorboards of home

Old Fashioned Slab Leak Repair Involved Removing Your Flooring From Inside the Home

  • Trenchless Pipe Repair: The most affordable and recommended option, this is a relatively new procedure being used by plumbers to repair slab leaks. Instead of the old version of digging through your flooring to get to the concrete slab which involved ruining your floors, we now will dig a tunnel in your yard all the way to the underside of your house to reach the slab noninvasively and repair it from underground. The only thing that gets ruined is your yard, which will grow back.
  • Original Slab Leak Repair: Using jackhammers to break through your flooring to get through to the concrete slab underneath, this is a loud and messy procedure that unfortunately ruins your flooring in the process. It also disrupts the family and home life, which is why it is not as used anymore.
  • Whole House Repiping: To prevent future slab leaks from happening instead of just repairing the busted pipe, your entire plumbing system in your home is replaced with brand new piping. This is an expensive investment but you won’t have to worry about any plumbing repairs for decades.

While none none of the slab leak repair options are cheap, they are necessary in preserving your home and health. Not getting timely repairs after realizing you have a slab leak can result in dangerous consequences, listed below.

  • Mold growth and foul odors
  • Collapsed building and sinkholes
  • Destruction of your home and structural damage
  • Potential financial ruin

As soon as you recognize that you have a slab leak in your Petaluma and Santa Rosa, CA home or business, call the plumbers at Perfect Plumbing Today at (707) 766-0807 immediately for repairs.

How To Find Where a Leak Is Coming From

Have you noticed wet or water stained floors in your home? This new development could be due to a plumbing leak. Because there are so many plumbing appliances in our home, it can be difficult to pinpoint where exactly the leak is located. Plumbing leaks can be very bad for your actual plumbing, as well as the structural integrity, so it’s important that they are found soon. If you are interested in learning how to find where a leak is coming from, keep reading for a further explanation.

How Do You Check for Plumbing Leaks?

A Water Meter That Is Installed On a Residential Property.

There Are Steps You Can Take To See If You Have a Plumbing Leak.

The biggest leaks will usually be found in a toilet, hose bibs, water heaters, and pipes.  If there is no visible sign of water around those areas and you still aren’t sure if you have a leak, there are some steps you can follow to find out if you have a plumbing leak.

  • Don’t Use Faucets or Other Points of Entry: If you want to accurately find a leak in your plumbing, you need to stop using any water for at least a few hours. This means no turning on the kitchen faucet or the outside house.
  • Check Your Water Meter: The water meter is usually located under a metal or plastic lid that says “Water Meter” and will typically be by a driveway or pathway. What you will need to do is record the number on the meter. In one or two hours come back and check the meter; if the number has changed, it means there is a leak.
  • Shut Off Water: Know that you know you have a leak, its time to find out if its outside or inside. The next thing you will want to do is to find the main shut-off valve and turn it off. The shut-off valve is usually located in the garage.
  • Inspect the Water Meter Again: When the water is shut off, go read your water meter again. When there is no change in the water meter reading, the leak is inside. When there is a change in the water meter reading, this means there is a water leak outside.

Many industries and companies are able to find various leaks all over your home. For example, Dimensional Drones can help find leaks in your roof using infrared leak detection in Austin, TX. Perfect Plumbing Today is able to help find able to accurately find the leak and repair it, using Gen-Ear LE Water Leak Location System. Call us at (707) 766-0807 to get plumbing leak repair in Petaluma and Santa Rosa, CA.

What Are The Signs of A Gas Leak?

If you have natural gas in your home, you know how much of a perk it is to see the monthly savings on your energy bill. Having gas lines can save over twice as much money on energy bills than using electricity. But will great advantages like energy efficiency and faster heating times, natural gas lines are dangerous, especially when there is a leak in the home. Gas has no smell, so a sulfuric rotten egg smell is added by gas companies to alert people of leaks. If you smell this, evacuate immediately. For gas line repairs and gas leak detection in Petaluma and Santa Rosa, CA, call Perfect Plumbing Today at (707) 766-0807. Here are some other ways you can identify a gas leak:

Flames on A Stove Should Be Blue, Not Orange, Which Is A Sign of Gas Leaks

How To Detect a Gas Leak in Your Home

  • Smell of rotten eggs or sulfur
  • Gas leak detector is going off
  • See bubbles in water
  • Orange or yellow flames instead of blue flames on stove
  • Hissing sound near gas line
  • Dead houseplants or foliage outside
  • Physical symptoms like headaches, nausea, fatigue, dizziness, or nosebleeds
  • Pets looking lethargic, vomiting, having trouble breathing, or having red eyes

Even if you suspect you have a gas leak, it is imperative that you don’t test your theory by turning on your stove or using any gas-related products as it could ignite an explosion. Evacuate your home with your family and pets and call us for emergency gas line repair. If you feel like the gas leak needs medical attention, call 911 first.